How to Prevent Razor Burn

Two Methods:Making Changes to Your RoutineTreating Razor Burn with Products

There is nothing quite as frustrating as cleaning up with a close shave, only to suffer from razor burn -- a common skin irritation that occurs after shaving. Razor burn can appear on any part of your body - from your face to your bikini line. But, there are ways to combat this unsightly and uncomfortable condition. By following the steps below, you can minimize the effects of razor burn and shaving-related skin irritation.

Method 1
Making Changes to Your Routine

  1. Image titled Prevent Razor Burn Step 1
    Use fresh razors. Razors that have been used many times become dull and grow bacteria - two problems that significantly worsen razor burn. Use new razors every two weeks or five uses, and clean your razor well after every use.
  2. Image titled Prevent Razor Burn Step 2
    Go in the right direction. Shave with the grain of the hair, in short, deliberate strokes. Shaving against the grain increases the odds of ingrown hairs, irritation, and inflamed skin. Long strokes often cause one to press down too hard on the skin, increasing razor contact and making razor burn more likely.
  3. Image titled Prevent Razor Burn Step 3
    Shave at night. Shaving your hair in the morning typically precedes the application of some product - for example, deodorant after shaving your armpits. Additionally, throughout the day you are likely to sweat and come into contact with bacteria and toxins from the air. The combination of all these things with your freshly shaved face greatly increases the likelihood of razor burn. Prevent this by simply shaving at night before heading to bed, where you will be less likely to dirty the area.
  4. Image titled Prevent Razor Burn Step 4
    Shave in the shower. Even when you dampen your skin before shaving, your hair doesn’t have enough time to soften and become easier to shave. Take a hot shower and shave after a few minutes; the heat and moisture will soften your hairs and make them easier to remove. Don’t wait too long, though, as waiting ten minutes or longer will swell up your skin and leave you with a bit of stubble after you’ve cooled down and dried off.
  5. Image titled Prevent Razor Burn Step 5
    Clean your razor regularly. If you shave without rinsing your blade, you might be increasing your chances for razor burn. The buildup of hair and product in the blades of your razor forces you to push down with more pressure on subsequent swipes, making it more likely that you’ll irritate or cut the skin. Thoroughly rinse your razor after every pass you take on your skin to remove all hair and buildup between the blades.
  6. Image titled Prevent Razor Burn Step 6
    Splash your skin with cold water. After every finished shave, splash your skin with cold water to close up the pores. This will constrict the skin and help to close any small cuts or ingrown hairs that are forming.[1]
  7. Image titled Prevent Razor Burn Step 7
    Dip the blade in rubbing alcohol after the final rinse. Blades last much longer than most people think. The apparent dulling of the blade is due to the formation of microscopic "teeth" on the edge, made up of mineral crystals from the water. These drag against the skin, causing the blade to grab and producing cuts and much of the razor burn. The alcohol will displace the water and the minerals within it, and evaporate without leaving a residue. Store the razor with the blade edges upward.

Method 2
Treating Razor Burn with Products

  1. Image titled Prevent Razor Burn Step 8
    Use a face wash. Even if you aren’t shaving your face, using a face wash containing salicylic acid will help to kill bacteria and reduce the likelihood of razor burn. Rub the area you are going to shave with a gentle face wash and rinse off before shaving.
  2. Image titled Prevent Razor Burn Step 9
    Use shaving gel. Never dry-shave with just water, and avoid using a shaving cream that can clog pores. Instead, apply a coat of shaving gel to the area you will shave, and rinse your razor after every swipe. The gel will help to protect your skin from the blades without clogging your pores.[2]
  3. Image titled Prevent Razor Burn Step 10
    Apply Aloe Vera. After you finish shaving, put a little Aloe Vera gel on the area. This will help to soothe irritated skin and prevent razor bumps. Allow it to set for 5-10 minutes before rinsing off with cold water and patting dry with a clean towel.
  4. Image titled Prevent Razor Burn Step 11
    Use an oatmeal mask. Oatmeal has been used for decades as a remedy for skin irritants and works great for razor burn. If you know that you are prone to razor burn or are already experiencing the mild rash, blend oatmeal with a bit of milk and dab it onto your skin. Leave it for 5-10 minutes before rinsing off with warm water.
  5. Image titled Prevent Razor Burn Step 12
    Put on some sour cream. Although this may sound odd or gross, the sour cream contains nutrients that are great for healing razor burn. Additionally, the cold cream feels good on the irritated skin. Swipe on a dollop of sour cream to the area you have finished shaving, and then rinse off after about 10 minutes.
  6. Image titled Prevent Razor Burn Step 13
    Try an antibiotic ointment. After you finish shaving, rub some antibiotic cream into your skin. This will kill the bacteria that clog pores and lead to the unsightly razor rash you are experiencing. Do this for several days or until your razor burn has reduced or disappeared completely.[3]
  7. Image titled Prevent Razor Burn Step 14
    Check for allergens. Look through all the products you apply to your skin to see what they’re made of. There might be something in the ingredients list that you are allergic to, and therefore are reacting to with a rash. Cut out all your skin products for a few days after shaving, and slowly incorporate them back in one at a time to find out which one is the culprit.[4]


  • For sensitive skin, consider shaving with a moisturizer or sorbolene cream. It helps lubricate as well as protect the skin during the shaving process and is less likely to cause irritation.
  • If your face is especially sensitive, applying an ointment or cream after shaving may soothe your skin and reduce the effects of razor burn.
  • A quick way to get rid of razor burn is to dab peroxide on trouble areas with a cotton ball and let air dry; then add some fragrance-free lotion. My husband does it on his face and rarely has any problems. Ingrown hair happens when a sliced-off strand curls back into the skin. This will sometimes look like razor burn. Often an ingrown hair will go away on its own.
  • Shave in the shower with cocoa butter instead of shaving cream.
  • Don't shave so hard and fast, but smooth strokes that are enough to get the hair without causing bumps and small scratches.


  • Don't share razors.
  • Don't use a bent or rusted razor.
  • Be careful when working with the blades. Don't test the sharpness with your fingertips. If you do get cut, make sure you clean and treat the wound appropriately.

Article Info

Featured Article

Categories: Featured Articles | Shaving | Skin Care