User Reviewed

How to Tie a Hangmans Noose

The Hangman's noose is perhaps the best-known knot in the world, and is ubiquitous on TV, in movies, and children's games. The Hangman is also used as a knot to tie angles to fishing-line. The knot is known for its strength under heavy weights and sudden movements, which makes it a good hook in an emergency.[1]If you intend to use this knot to hurt yourself or others, please click here first.

Steps

  1. Image titled Tie a Hangmans Noose Step 1
    1
    Understand basic knot-tying terminology to make learning knots a breeze. Learning how to tie a knot on the internet is tough if you don't know the basic vocab. For this knot, you should know:
    • Bight: Simply a U-shaped bend, where the rope turns back on itself
    • Standing Line: This is the excess rope at the end of your knot. For example, if you were tying the noose at the end of a roll of rope, the standing line is the part leading back to the roll.
  2. Image titled Tie a Hangmans Noose Step 2
    2
    Pull out at least 3-4 feet of rope to work with. The longer the rope, the bigger the noose. Longer ropes also allow you to get more of the infamous coils around the top of the knot, which also makes it stronger.
  3. Image titled Tie a Hangmans Noose Step 3
    3
    Take the last two feet of rope (from the end) and make a simple S-shape. [2] Take the end of the rope and create two bends, forming an S-shape with the rope. The standing line should be left long so that you have some string left at the end.
  4. Image titled Tie a Hangmans Noose Step 4
    4
    Take the standing line of the rope and pass it under all three sections of the S. Simply take the top end of the rope and bring it under everything, so that the S-shape in your rope rests on top of the standing line. This will slightly "ruin" the S shape -- what is important are the two bends.
  5. Image titled Tie a Hangmans Noose Step 5
    5
    Loop the end of the rope back around the top of the S-shape of rope and then back under. This is the first of the many "wraps" that sit at the top of noose. This is one revolution. Pull it tight, so that there is still the loop on one end.[3]
  6. Image titled Tie a Hangmans Noose Step 6
    6
    Continue wrapping the rope around the S-Shape of rope 6 more times. Traditionally, a hangman's noose has seven wraps, but you can do it as many times as you want. You must, however, wrap it an odd number of times, otherwise you will not be able to finish the knot.[4]
    • You must have at least 2-3 inches of the end of the rope left over when done.
  7. Image titled Tie a Hangmans Noose Step 7
    7
    Pass the end of the rope through the bottom loop of the noose. The bottom loop, means the loop next to the standing line of rope, leading away from your knot. Tuck the end of the rope through this bight.
  8. Image titled Tie a Hangmans Noose Step 8
    8
    Pull on the noose and standing line to tighten. This will also expand your noose hole, tightening the entire knot so that you're just left with the rope, the coils, and the noose. Once tightened, this knot is strong and difficult to undo.
    • If the noose isn't big enough, you should start over, making a larger S-shape than before.

Tips

  • Rope works much better than string.
  • Remember -- you can coil the rope as many times as you want, as long as it is an odd number of wraps

Warnings

  • Do not put it around people's necks and tighten; it may be hard to get off and may kill the person.
  • It can be considered racist to hang a noose in places. Hanging a rival in effigy may lead to hate crime charges.
  • If you are contemplating suicide, please seek help immediately.

Things You'll Need

  • Rope or string

Article Info

Categories: Knot Tying